USMC Pin-iT Card

(0 Reviews)

Price:
$12.99 /4 ounce

Quantity:
(0 Available)

Total Price:

Share:
Sold By
Military Ribbon Rack Builder - Pin-iT Military Uniform Tools
(1 Customer reviews)

Perfectly Placed Uniform Items

The USMC Pin-iT Card is an indispensable tool for achieving a perfectly placed uniform. It ensures that all your uniform items, including nametags, ribbons, insignias, medals, collar devices, and Garrison cover, are perfectly aligned.

Say goodbye to the frustration of trying to measure and align your uniform items, the Pin-iT Card has perfectly placed holes and lines that make it easy to align with your uniform.

With the Pin-iT Card, you no longer have to worry about crooked or misaligned uniform items, giving you the confidence to look your best in any situation.

 

Designed to Comply with Regulations Manual

Months of hard work and attention to detail went into designing the USMC Pin-iT Card. It was designed to comply with the Uniform Regulations Manual, ensuring that all the correct lines, measurements, and holes were labeled on the card.

With the Pin-iT Card, you can be sure that your uniform items are correctly placed and meet all necessary regulations.

Whether you're a new recruit or a seasoned veteran, the Pin-iT Card takes the guesswork out of aligning your uniform items.

 

Durable and Convenient

The USMC Pin-iT Card is built to last. Made of durable stainless steel with etched lines, you don't have to worry about it breaking or the paint wearing off.

The Pin-iT Card fits in your wallet, so you always have it when you need it. No more digging through your gear to find your alignment tools.

With the Pin-iT Card, you can be confident that your uniform items are perfectly aligned, giving you one less thing to worry about.

  • Achieve Perfectly Placed Uniform Items with the USMC Pin-iT Card
  • USMC Pin-iT Card: Designed to Comply with Regulations Manual
  • Durable and Convenient: USMC Pin-iT Card for Perfectly Aligned Uniform Items
  • USMC Pin-iT Card: The Ultimate Tool for Aligning Your Uniform Items
  • Get the Perfectly Aligned Uniform with the USMC Pin-iT Card



How-To Use

Collar Insignias. Khaki- ENLISTED

If you need to place your collar insignias on a diagonal pointing to the tip of the collar, simply use the dotted lines in the middle of the card labeled “Center Line” and align on the point of the collar.

Adjust the Pin-iT Card so that the top and bottom corners of the card are just touching the sides of the collar (A, B). Then, Place the bottom of your insignia in the notch on the side of the Pin-iT Card labeled “Collar Devices” ensuring that the bottom of the insignia is resting on the notch.

This will give you a measurement of 1/2″ on each side of your insignia.

Collar Insignias.  Camo- OFFICER

The Pin-iT Card is the same size as the collar of your Camo Shirt.

Using the side of the Pin-iT Card, place it on the shirt collar so that the sides of the card are touching the top and bottom of the collar.

Next, slide the Pin-iT Card up the shirt collar until you see the collar peeking through the edge of hole V.  (Using the top edge of hole V will ensure that your collar device is one inch up from the edge of the front collar.

Then, Place your collar device into the notch on the Pin-iT Card labeled “Collar Devices” ensuring that the bottom of the device is resting on the notch.

Collar Insignias. Camo- ENLISTED

Use the dotted lines in the middle of the card labeled “Center Line” and align them on the point of the collar.

Adjust the Pin-iT Card so that the top and bottom corners of the card are just touching the sides of the collar (A, B). Then, Place the bottom of your insignia in the notch on the side of the Pin-iT Card labeled “Collar Devices” ensuring that the bottom of the insignia is resting on the notch.

This will give you a measurement of 1/2″ on each side of your insignia.

Garrison Cover

Place the bottom of the Pin-iT Card on the bottom edge of the garrison cover. Place the left side of the Pin-iT Card on the left edge of the garrison cover. Then press your rate insignia into the slot labeled “Garrison Cover”.

For Officers- Flip the garrison cover over as well as the Pin-iT Card and then align the card to the bottom and right edge of the garrison cover.

There have been no reviews for this product yet.